Longline HTS1F Heating Cables – Tmax 200 °C – L = 5 km
Longline HTS1F is a series resistance heating cable with a single conductor. It is supplied in multiples of three cables to be configured as a three-phase heating system.
It is used for freeze protection or temperature maintenance of long pipelines, up to 5 km, in both safe and hazardous areas.
A typical application is the temperature maintenance of crude oils or fuel oils in above-ground or buried transfer lines.
HTS1F long-distance heating cable reduces the number of required power feed points, thereby lowering the costs of supply cabling and distribution equipment. Circuits are often powered only from the pipeline ends.
The number of heating cables and the conductor size are adjusted to deliver the required thermal output according to the circuit length. HTS1F cables are connected directly to the three-phase network or via a step-up transformer.
HTS1F longline heating cable is certified to international ATEX, IEC, IECEx and CE standards, ensuring safe use in both hazardous and non-hazardous areas.
Please contact us for any specific requirements.
Technical information
Applications
Industries
Downloads
The Longline HTS1F series resistance heating cable provides reliable and uniform temperature maintenance on pipelines up to 5 km in length. Designed for demanding industrial applications, it delivers power outputs up to 50 W/m, operates at voltages up to 1000 VAC, and withstands temperatures up to 200 °C, while reducing the need for multiple power feeds thanks to its three-phase architecture.
Key Benefits:
-Circuit lengths up to 5 km
-Power output up to 50 W/m
-Operates up to 1000 VAC
-Maximum allowable exposure temperature: 200 °C
-Reduced power supply and distribution costs
Product Specification – Maximum Allowable Exposure Temperature: 200 °C
The HTS1F heating cable is available with power outputs of 10, 20, 30, 40 and 50 W/m. |
Maximum Continuous Exposure Temperature (energized) | 200°C |
Maximum Allowable Exposure Temperature (de-energized) | 200°C |
Minimum Operating Temperature | -80°C |
Minimum Installation Temperature | -40°C |
Power Supply |
Up to 600 V – Single-phase Up to 1000 V – Three-phase
|
Power Output | Up to 50W/m |
Maximum Heated Equipment Temperatures (°C)
Nominal Power Output of the Heating Cable (W/m) | HTS1F-x | HTS1F-xS | HTS1F-xF |
|---|---|---|---|
10 | 200 | 200 | 200 |
20 | 191 | 180 | 180 |
30 | 163 | 157 | 157 |
40 | 133 | 127 | 127 |
50 | 97 | 92 | 92 |
Surface Temperature Limits in accordance with EN 50014 | |||
Please contact us for any specific requirements.
HTS1F longline heating cable is ideal for freeze protection and temperature maintenance of fluids in very long pipelines, either above ground or buried, up to 5 km.
Application example: For buried pipelines extending over several kilometres (oil transport, district heating, or industrial fluids), it is essential to maintain fluid temperature to ensure proper circulation.
Problem example: Constant ground heat losses, the impossibility of adding multiple intermediate power feeds, and the risk of a single circuit failure making the pipeline unusable highlight the need for reliability and robustness.
The HTS1F Solution
The HTS1F (Longline) heating cable, with its single low-resistance conductor, is specifically designed to handle very long circuits (up to 5 km) in buried conditions.
-Robust and efficient design to absorb constant ground heat losses
-Ideal for installations where electrical access is limited to the pipeline ends
-Enhanced reliability to ensure continuous operation of critical pipelines
Longline (HTS1F) Heating Cables are used in the following sectors:
-Chemical & Petrochemical
-Oil & Gas Industry
-Energy Sector
-Transport and Industrial Infrastructure
-Machine Building
-Construction and Civil Engineering
-Food & Beverage Industry
This list is not exhaustive.
